We use Mars Orbiter Laser Altimeter (MOLA) topographic data and Thermal Emission Imaging System (THEMIS) visible (VIS) images to study the cavity and the ejecta blanket of a very fresh Martian impact crater ~29 km in diameter, with the provisional International Astronomical Union (IAU) name Tooting crater. This crater is very young, as demonstrated by the large depth/ diameter ratio (0.065), impact melt preserved on the walls and floor, an extensive secondary crater field, and only 13 superposed impact craters (all 54 to 234 meters in diameter) on the ~8120 km^2 ejecta blanket. Because the pre-impact terrain was essentially flat, we can measure the volume of the crater cavity and ejecta deposits. Tooting crater has a rim height that has 500 m variation around the rim crest and a very large central peak (1052 m high and >9 km wide). Crater cavity volume (i.e., volume below the pre-impact terrain) is ~380 km^3 and the volume of materials above the pre-impact terrain is ~425 km^3. The ejecta thickness is often very thin (<20 m) throughout much of the ejecta blanket. There is a pronounced asymmetry in the ejecta blanket, suggestive of an oblique impact, which has resulted in up to ~100 m of additional ejecta thickness being deposited down-range compared to the up-range value at the same radial distance from the rim crest. Distal ramparts are 60 to 125 m high, comparable to the heights of ramparts measured at other multi-layered ejecta craters. Tooting crater serves as a fresh end-member for the large impact craters on Mars formed in volcanic materials, and as such may be useful for comparison to fresh craters in other target materials.

We have analyzed Shişr 033, a CR chondrite from the Omani desert, using several different analytical techniques designed to study the degree of terrestrial alteration of this meteorite and also its petrologic classification. Bulk chemical analyses (including organic carbon and mean total H2O content) are consistent with a CR classification. Additionally, oxygen isotope analysis on a bulk sample indicates that Shişr 033 is of type CR2. Amino acid analysis using liquid chromatography with UV fluorescence detection (HPLC-FD) and liquid chromatography-time of flight-mass spectrometry (LC-ToF-MS) show that the absolute and the relative amino acid content of Shişr 033 is distinct from other carbonaceous chondrites. Oxygen isotope analysis of a phyllosilicate-rich dark inclusion shows that this inclusion is closer to CV3 or CO3 chondrites. The effects of terrestrial weathering in Shişr 033 are evident from the dark inclusion carbon isotopic data, bulk chemistry (through the elevated concentrations of Sr and Ba), and amino acid data, which suggests extensive amino acid contamination of the meteorite from the fall site soil. Nevertheless, Shişr 033 contains a small fraction of indigenous components, as indicated by the presence of the extraterrestrial amino acid -aminoisobutyric acid (AIB) that was not detected in the Shişr soils. Finally, the terrestrial age of Shişr 033 was determined and is discussed in the context of high levels of contamination.

It is now established that a large extraterrestrial object hit the Earth at the end of the Cretaceous period, about 65 Ma ago. We have investigated Re-Os, Hf-W, and Mn-Cr isotope systems in sediments from the Cretaceous and the Paleogene in order to characterize the type of impactor. Within the Cretaceous-Tertiary (K-T) boundary layer, extraterrestrial material is mixed with terrestrial material, causing a dilution of the extraterrestrial isotope signature that is difficult to quantify. A phase essentially composed of Ni-rich spinel, formed in the atmosphere mainly from melted projectile material, is likely to contain the extraterrestrial isotopic signature of the impactor. We show that the analysis of spinel is indeed the best approach to determine the initial isotope composition of the impactor, and that W and Cr isotopes confirm that the projectile was a carbonaceous chondrite.

Numerical simulations have been performed for the differentiation of planetesimals undergoing linear accretion growth with 26Al and 60Fe as the heat sources. Planetesimal accretion was started at chosen times up to 3 Ma after Ca-Al-rich inclusions (CAIs) were formed, and was continued for periods of 0.001-1 Ma. The planetesimals were initially porous, unconsolidated bodies at 250 K, but became sintered at around 700 K, ending up as compact bodies whose final radii were 20, 50, 100, or 270 km. With further heating, the planetesimals underwent melting and igneous differentiation. Two approaches to core segregation were tried. In the first, labelled A, the core grew gradually before silicate began to melt, and in the second, labelled B, the core segregated once the silicate had become 40% molten. In A, when the silicate had become 20% molten, the basaltic melt fraction began migrating upward to the surface, carrying 26Al with it. The 60Fe partitioned between core and mantle. The results show that the rate and timing of core and crust formation depend mainly on the time after CAIs when planetesimal accretion started. They imply significant melting where accretion was complete before 2 Ma, and a little melting in the deep interiors of planetesimals that accreted as late as 3 Ma. The latest melting would have occurred at <10 Ma. The effect on core and crust formation of the planetesimals final size, the duration of accretion, and the choice of (60Fe/56Fe)initial were also found to be important, particularly where accretion was late. The results are consistent with the isotopic ages of differentiated meteorites, and they suggest that the accretion of chondritic parent bodies began more than 2 or 3 Ma after CAIs.

Rock magnetic properties across several K-T boundary sections have been investigated to reveal any possible magnetic signature associated with the remains of the impact event at the end of the Cretaceous. Studied sections locations vary in distance to the Chicxulub structure from distal (Agost and Caravaca, Spain), through closer (ODP Hole 1049A, Blake Nose, North Atlantic), to proximal (El Mimbral and La Lajilla, Mexico). A clear magnetic signature is associated with the fireball layer in the most distal sections, consisting of a sharp increase in susceptibility and saturation isothermal remanent magnetization (SIRM), and a decrease in remanence coercivity. Magnetic properties in these sections point to a distinctive ferrimagnetic phase, probably corresponding to the reported Mg- and Ni-rich, highly oxidized spinels of meteoritic origin. At closer and proximal sections magnetic properties are different. Although there is an increase in susceptibility and SIRM associated with a rusty layer placed on top of the siliciclastic deposit in proximal sections, and with a similar limonitic layer on top of the spherule bed that defines the boundary at Blake Nose, the magnetic properties indicate a mixture of iron oxyhydroxides dominated by fine-grained goethite. Based on previous geochemical studies at Blake Nose and new geochemical and PGE abundance measurements performed in this work at El Mimbral, this goethite-rich layer can be interpreted as an effect of diagenetic remobilization and precipitation of Fe. There is not enough evidence to assert that this Fe concentration layer at proximal sections is directly related to deposition of fine meteoritic material. Magnetic, geochemical, and iridium data reject it as a primary meteoritic phase.